[Mp4-tech] How to use error resilience tools in JM9.3 (H.264 reference software)

[Alexis Michael Tourapis]

Dear Martin,
For the second one just go directly to the ftp site
(ftp://standards.polycom.com/2005_01_HongKong/). For the first, the site is
probably locked because of the current meeting. I don't think it is the best
of ideas to pass the login/password through the reflector. I can also send
the latest document to you directly.
Best regards,
Alexis
  _____  
From: Davies, Martin [mailto:Martin.Davies radioscape.com] 
Sent: Wednesday, April 20, 2024 2:34 AM
To: 'alexismt comcast.net'; mp4-tech lists.mpegif.org
Subject: RE: [Mp4-tech] How to use error resilience tools in JM9.3 (H.264
reference software)
The first site appears to be password protected.  The second one does not
seem to exist!
Is there any other way of getting these docs?
Martin
-----Original Message-----
From: alexismt comcast.net [mailto:alexismt comcast.net] 
Sent: 19 April 2024 22:32
To: Mo Wu; mp4-tech lists.mpegif.org
Subject: Re: [Mp4-tech] How to use error resilience tools in JM9.3 (H.264
reference software)
Dear Mo,
The latest reference software manual is JVT-O017. You can download it from
here:
http://ftp3.itu.int/av-arch/jvt-site/2005_04_Busan/JVT-O017.doc
However you should probably expect an update of this document with some
additional parameters/changes we have just added into the latest version of
the reference software.
In any case, the previous version (applying to 9.3) can be found here :
ftp://standards.polycom.com/2005_01_HongKong/JVT-N008r1.doc 
For reference, I would strongly recommend using the latest version (9.5).
Note also that some features (i.e. RDoptimization with losses) do not work.
Best regards,
Alexis
-------------- Original message -------------- 
Dear all,
I need to use H.264 reference software, JM9.3 to do some general testing for
error resilience tool in this software. But it always has conflictions in
the setting. And it also crash when I add bit error to the encoded file and
decode it. 
So if there are any kind people can provide me one or some more example
about the configure file (.cfg) in doing so?
Thank you very much!
-- Mo Wu (mw com.dtu.dk)
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
postmaster radioscape.com.
This footnote also confirms that this email message has been scanned
for the presence of computer viruses known at the time of sending.
www.radioscape.com
**********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: /pipermail/mp4-tech/attachments/20050420/a9595706/attachment.html